IntroduceAlloy C-276 is a nickel-chromium-molybdenum alloy with universal corrosion resistance unmatched by any other alloy. C-276 is also known as Inconel C-276 or Hastelloy C-276 and is an improved wrought version of alloy C in that it usually doesn't need to be solution heat-treated after welding
Read More
Basic InformationInconel 625 alloy is based on nickel, with 21-23% chromium, 8-10% molybdenum and 3.15-4.15% niobium added. It is a typical solid solution strengthened alloy with excellent mechanical properties, corrosion resistance and welding performance, and its operating temperature range is fro
Read More
254SMO (UNS S31254, ASTM F44, Din 1.4547) is a so-called super austenitic stainless steel. By increasing the molybdenum content to 6%, it achieves a pitting resistance equivalent number (PREN) > 43, which is similar to that of a super duplex stainless steel (SDSS). It demonstrates outstanding resist
Read More
904L is a highly alloyed austenitic stainless steel with very low carbon content. The steel is designed for harsh corrosion conditions. The alloy was originally developed to resist corrosion in dilute sulfuric acid. This feature has been proven to be very successful in practical applications for man
Read More
Brief descriptionDuplex Alloy 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel gra
Read More
Alloy 20 FeaturesAlloy 20 is a type of stainless steel with superior corrosion resistance. This alloy is composed of nickel, chromium, molybdenum, and copper to provide excellent resistance against sulfuric acid, phosphoric acid, nitric acid, and alkaline solutions. Additionally, it has good weldabi
Read More
Introduction to Inconel 718As a leading supplier & manufacturer in China, JN Alloy supply cost-effective Inconel 718 Products. INCONEL alloy 718 (UNS N07718 / W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F. The age-hardenable alloy can be readi
Read More
Learn about UNS S31803UNS S31803 is a duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grad
Read More