NEWS

Hastelloy C22 and C276 are both nickel-chromium-molybdenum-tungsten alloys produced by Haynes International (formerly Cabot Corporation / Stellite Division). They belong to the same family of corrosion-resistant Hastelloy alloys, but they were developed in different decades to address evolving industrial needs.

6-step engineering process for selecting offshore nickel alloy pipe. PREN formulas, NACE MR0175 compliance, PREN comparison of 8 alloys, and a 10-service environment matrix. Written for engineers.

Duplex 2205 is the cost-effective default for most industrial applications. Super Duplex 2507 is the engineering choice when chloride concentrations, temperatures, or criticality levels push beyond 2205's capability envelope.

At Jinie, we take great pride in delivering premium-grade specialty stainless steel fittings to industries around the world. We are pleased to share the successful shipment of a comprehensive set of 16-inch piping fittings, consisting of high-alloy stainless steel materials in both 904L and F347H grades.

Every industrial construction project faces the same fundamental question: should pipe assemblies be welded in a controlled shop environment before they arrive on site (prefabrication), or should crews perform all welding in the field after installation?

The 0.2% offset yield strength of Inconel 625 (UNS N06625) at 700°C (1292°F) is approximately 414–448 MPa (60–65 ksi), depending on product form and heat-treatment condition. This exceeds the yield strength of 316L stainless steel at the same temperature by more than 300% and outperforms most commercially available austenitic alloys, making Inconel 625 the go-to material for high-temperature pressure vessels, heat exchangers, and aerospace combustion hardware.

In 2026, Hastelloy C276 pipe is priced between USD $35 and $75 per kilogram depending on pipe form (seamless, welded, or EFW), wall schedule, outer diameter, and order quantity. Seamless pipe commands the highest price at $45–$75/kg, while welded pipe ranges from $35–$55/kg. Prices fluctuate with global nickel and molybdenum spot markets, trade policy, and mill certification requirements.

This guide is a comprehensive material selection reference for offshore oil and gas pipelines. It explains the degradation mechanisms that govern alloy choice, introduces the Pitting Resistance Equivalent Number (PREN) framework, details the NACE MR0175 / ISO 15156 sour-service qualification logic, compares the ten most widely specified alloys grade-by-grade, and provides a four-step decision framework, design-code references, and real-world case studies.